Leveling a trailer can be tricky. It takes practice and a little bit of patience. Once you’ve done it a time or two and have had a chance to get used to your own trailer, it gets easier and faster.
Start By Getting Your Trailer In The Right Spot
Don’t try to make any adjustments into after you have gotten your trailer into the desired spot. Pull your trailer over to where you want it to be. Once you have your trailer in place, you can start making adjustments.
Place A Level Across Your Trailer Hitch
Sometimes, it’s easy to tell that a trailer isn’t level. However, it can be difficult to determine how to fix the problem. If you place a level across your trailer hitch, you’ll be able to find the source of your issue. From there, you’ll be able to get things fixed.
Use A Board To Lift The Low Side
Carry leveling boards with you. The boards should be at least 2 inches thick. If you place the board beneath the tires on the low side, you should be able to get your trailer level. If a single board isn’t enough to get the trailer level, add another board. Eventually, the problem should be solved.
Watch Your Wheels
You don’t want your trailer to roll away when you have it parked. You should chock your trailer’s wheels once you have it level. Make sure you unhitch your trailer from the towing vehicle as well. Once your trailer is parked, you are going to want to make sure it stays in place.
Leveling your trailer can be a challenge. However, it is easy if you know what you are doing. If you follow all of the tips above, you should be able to get it level without any problems.